E 10210 12 - 2005
Protocols:
MODULAR X6 CCTALK VALIDATOR 25
Where
Dir = address of the corresponding validator
Data 1 = Status shown in Table 6
Table 6: Status codes
Code
Status
0 O.K.
1
Coin return mechanism activated
2
String detector system activated
Command protected by a PIN.
Notes:
b)
This command will not carry out a complete check of the validator. For this use the
command PERFORM SELF-CHECK [232], is recommended.
c)
f the Validator does not have its software correctly loaded, a NACK is returned to this
command.
d)
The Validator does not answer to this command if it is programmed in “L66
compatibility” mode.
5.8
REQUEST MANUFACTURER ID [246]
With this command, the corresponding validator returns the manufacturer identification of the
device to the Machine: “AZK”
Send:
[Dir] [0] [1] [246] [Chk]
Reply:
[1] [6] [Dir] [0] [Data 1] ... [Data n] [Chk] -> ACK with n data
Where:
Data 1 - Data n = string of ASCII characters
Dir = address of the corresponding validator
The default value returned consists of 3 bytes:
Data 1 = ‘A’
