E 10210 12 - 2005
Protocols:
MODULAR X6 CCTALK VALIDATOR 40
No coin is accepted until the command READ BUFFERED CREDIT OR ERROR CODES [229] is
received.
Each time the first command is received (229) the validator can accept coins and starts a timer
that if 1 second passes without receiving this command the validator stops accepting coins.
This action is carried out so that events of coins are not lost if the Machine cannot consult the
Validator with sufficient frequency. The advised consulting time can be obtained using the
command REQUEST POLLING PRIORITY [249]. On receiving command 229 the timer is reset.
Command protected by a PIN.
Notes:
a)
A NACK is returned if the Exit module does not have its software correctly loaded
b)
After a reset or power-up deactivates the admission of coins until it receives the
command READ BUFFERED CREDIT OR ERROR CODES [229].
Example:
The Machine requests Validator number 2 for information on credits or errors.
Send:
[2] [0] [1] [229] [24]
Reply:
[1] [11] [2] [0] [6] [6] [4] [0] [20] [0] [23] [6] [4] [13] [2] [158]
Note: From this reply we deduce that the validator has detected 6 events and the last five
have been: coin 6 accepted through path 4, coin rejected by string detector, coin rejected as
not in tables, coin 6 accepted through path 4 and coin 13 accepted through path 2.
5.21
MODIFY MASTER INHIBIT STATUS [228]
This command is not available if the Validator is programmed in “L66 compatibility” mode.
The Validator has a “master inhibit” bit, such that if it is deactivated the Validator will not
accept any coin. This bit can be activated or deactivated using this command:
Send:
[Dir] [1] [2] [228] [Data 1] [Chk]
