E 10210 12 - 2005
Protocols:
MODULAR X6 CCTALK VALIDATOR 72
Notes:
a)
A NACK is returned if:
-
The Exit module does not have its software correctly loaded
-
The Exit module does not have its tables correctly programmed.
-
It has received an incorrect bank number
-
There has been an error to the programming of the Flash memory of the Validator.
b) This command is not available if the Validator is working in “Secure Mode”.
5.53
REQUEST BANK SELECT [178]
Command not available in “Secure Mode”.
The Machine requests the Validator for the bank of coins that is activated:
Send:
[Dir] [0] [1] [178] [Chk]
Reply:
[1] [1] [Dir] [0] [Data 1] [Chk] -> ACK with a data
Where Dir = address of the corresponding validator.
Data 1 = 0, 1, 2, 3: Number of present bank
The bank of coins can be modified using the command MODIFY BANK SELECT [179].
Command protected by a PIN.
Notes:
a)
A NACK is returned if:
-
The Exit module does not have its software correctly loaded
-
The Exit module does not have its tables correctly programmed.
b) This command is not available if the Validator is working in “Secure Mode”.
5.54
REQUEST ALARM COUNTER [176]
This command is not available if the Validator is programmed in “L66 compatibility” mode.
