E 10210 12 - 2005
Protocols:
MODULAR X6 CCTALK VALIDATOR 35
The Machine requests to Validator 2 to carry out a Hardware Test:
Send:
[2] [0] [1] [232] [21]
Reply:
[1] [2] [2] [0] [2] [3] [246]
The Validator informs that it has detected an error in electromagnetic sensor number 3: (reply
= 3: 0000.0100B)
After correcting the error
Send:
[2] [0] [1] [232] [21]
Reply:
[1] [1] [2] [0] [0] [252] -> Validator OK
5.18
MODIFY INHIBIT STATUS [231]
Using this command the 16 inhibit bits of the Validator configured. Each coin table will be
associated with an inhibit bit, so that the activated coins will be those whose inhibit bit is at 1.
Initially and after a reset all the bits are at 0, so that all the coins will be inhibited.
Send:
[Dir] [2] [2] [231] [Data 1] [Data 2] [Chk]
Reply:
[1] [0] [Dir] [0] [Chk] -> ACK without data
Where
Dir = address of the corresponding Validator
[Data 1] = Inhibit byte 1 (LSB), coins 1 to 8
[Data 2] = Inhibit byte 2 (MSB), coins 9 to 16
Each coin is indicated by a bit. Seeing Data 1 and Data 2 as a whole number without sign:
-
bit 0 (in Data 1): coin 1
-
bit 1 (in Data 1): coin 2
