E 10210 12 - 2005
Protocols:
MODULAR X6 CCTALK VALIDATOR 46
Data 1. Bit7 = Path 8
Bit = 1: path permitted.
Bit = 0: path prohibited.
These values can be modified using the command MODIFY SORTER OVERRIDE STATUS [222].
Command protected by a PIN.
Notes:
a)
A NACK is returned if the Exit module does not have its software correctly loaded.
b)
The Validator does not answer if it is programmed in “L66 compatibility” mode.
Example:
The Machine requests Validator number 2 for the classification paths that are permitted and
the paths that are prohibited:
Send:
[2] [0] [1] [221] [32]
Reply:
[1] [1] [2] [0] [6] [246]
The value received is (in binary): 0000.0110 = 6 (decimal)
- Paths 2 and 3: permitted
- Rest of paths: prohibited:
5.27
ENTER A NEW PIN NUMBER [219]
The Validator can be protected by a number (a PIN) so that no command can be executed
(except the command SIMPLE POLL [254]) if the correct PIN has not been previously
introduced.
The command ENTER A NEW PIN NUMBER allows the modification of the PIN stored in the
Validator:
Send:
[Dir] [4] [1] [219] [Data 1] [Data 2] [Data 3] [Data 4] [Chk]
