E 10210 12 - 2005
Protocols:
MODULAR X6 CCTALK VALIDATOR 63
Where
Dir = address of the corresponding validator
Data 1 = number of coins rejected (LSB)
Data 2 = number of coins rejected (2SB)
Data 3 = number of coins rejected (MSB)
The validator keeps a counter with the number of coins rejected by different reasons than not
being in the tables: inhibited coins, string detector mechanism activated, etc. This counter is of
three bytes and can store up to 16.777.215 coins. It is incremented each time a coin is
rejected by the Validator.
This counter works the same as the coins inserted counter. See the command REQUEST
INSERTION COUNTER [226].
Command protected by a PIN.
Notes:
a)
A NACK is returned if the Exit module does not have its software correctly loaded
b)
The Validator does not answer if it is programmed in “L66 compatibility” mode.
5.44
REQUEST FRAUD COUNTER [193]
This command is not available if the Validator is programmed in “L66 compatibility” mode.
This command requests the Validator for information about the coins rejected counter for not
being in the coin tables (fraud attempt).
Send:
[Dir] [0] [1] [193] [Chk]
Reply:
[1] [3] [Dir] [0] [Data 1] [Data 2] [Data 3] [Chk] -> ACK with 3 data
Where
Dir = address of the corresponding validator
Data 1 = number of coins rejected (LSB)
Data 2 = number of coins rejected (2SB)
