E 10210 12 - 2005
Protocols:
MODULAR X6 CCTALK VALIDATOR 55
The Machine configures the Validator number 2 so that coin 6 is sent to sorter path 1. If it is
busy it should leave through path 2 and if this is also busy it should leave through path 3. If
this is busy it should be sent to the default path.
Send:
[2] [5] [1] [210] [6] [1] [2] [3] [0] [26]
Reply:
[1] [0] [2] [0] [253]
5.35
REQUEST SORTER PATHS [209]
This command requests the Validator for information about the assigned sorter path of a coin.
The answer depends on the Validator working mode:
“Normal” working mode:
Send:
[Dir] [1] [1] [209] [Data 1] [Chk]
Reply:
[1] [5] [Dir] [0] [Data 2] [Data 3] [Data 4] [Data 5] [Chk] -> ACK with 4
data
Where
Dir = address of the corresponding Validator
[Data 1] = Code of coin
[Data 2] = Assigned sorter path 1.
[Data 3] = Assigned sorter path 2.
[Data 4] = Assigned sorter path 3.
[Data 5] = Assigned sorter path 4.
“L66 compatibility” working mode:
Send:
[Dir] [1] [1] [209] [Data 1] [Chk]
Reply:
[1] [5] [Dir] [0] [Data 2] [Chk] -> ACK with 1 data
Where
Dir = address of the corresponding Validator
[Data 1] = Code of coin
[Data 2] = Assigned sorter path.
The values returned are the programmed using the command MODIFY SORTER PATHS [210].
Command protected by a PIN.
Notes:
