freeGuard 100 CLI User Manual
95
end
config log log setting
unset <keyword>
end
get log log setting
show log log setting
log setting command keywords and variables
Keywords &
Variables
Description
Default
encrypt {enable |
disable}
Enter enable to enable encrypted communication .
disable
localid <str_id>
Enter the local ID for an IPSec VPN tunnel to a Log unit. You
can create an IPSec VPN tunnel if one or more freeGuard 100s
are sendinglog messages to a unit across the Internet. Using an
IPSec VPN tunnel means thatall log messages sent by the
freeGuard 100 areencrypted and secure.
No default.
psksecret
<str_psk>
Enter the pre-shared key for the IPSec VPN tunnel to a Log unit.
You can create anIPSec VPN tunnel if one or more freeGuard
100s are sending log messages to a unit across the Internet.
Using an IPSec VPN tunnel means that all log messages sent
by the freeGuard 100 are encrypted and secure.
No default.
server
<address_ipv4>
Enter the IP address of the unit.
No default.
status {disable |
enable}
Enter enable to enable logging to a unit.
disable
Example
This example shows how to enable logging to a unit and set the IP address.
config log log setting
set status enable
set server 192.168.100.1
end
This example shows how to display the log setting for logging to a unit.
get log log setting
This example shows how to display the configuration for logging to a unit.
show log setting
Summary of Contents for freeGuard 100
