freeGuard 100 CLI User Manual
59
•
Sets
action
to accept to allow connections
•
Applies network address translation (nat is enabled)
•
Applies traffic shaping to guarantee 100 KBytes/s of bandwidth is available, to limit the maximum
bandwidth to 500 KBytes/second, and to set the priority for the traffic accepted by this policy to
medium (
trafficshaping
enabled,
gbandwidth
set to 100,
maxbandwidth
set to 500,
priority
set to
medium)
config firewall policy
edit 2
set srcintf external
set dstintf dmz
set status enable
set srcaddr all
set dstaddr dmz_web_server
set schedule Always
set service HTTP
set action accept
set nat enable
set trafficshaping enable
set gbandwidth 100
set maxbandwidth 500
set priority medium
end
This example shows how to display the settings for the firewall policy command.
get firewall policy
This example shows how to display the settings for the id 2 policy.
get firewall policy 2
This example shows how to display the configuration for the firewall policy command.
show firewall policy
This example shows how to display the configuration for the id 2 policy.
show firewall policy 2
Command History
Related Commands
Summary of Contents for freeGuard 100
