50
Command History
Related Commands
•
ipmacbinding table
5.5
ipmacbinding table
Use this command to add IP and MAC address pairs to the IP/MAC binding table, or to edit or delete
IP and MAC address pairs added to the IP/MAC binding table.
You can enable or disable IP/MAC binding for each individual freeGuard 100 interface using the ipmac
keyword.
Command syntax pattern
config firewall ipmacbinding table
edit <sequence_integer>
set <keyword> <variable>
end
config firewall ipmacbinding table
edit <sequence_integer>
unset <keyword>
end
config firewall ipmacbinding table
delete <sequence_integer>
end
get firewall ipmacbinding setting [<sequence_integer>]
show firewall ipmacbinding setting [<sequence_integer>]
firewall ipmacbinding table command keywords and variables
Keywords & Variables Description
Default
ip <address_ipv4>
The IP address to add to the IP/MAC binding
table. You can bind multiple IP addresses to the
same MAC address. You cannot bind multiple
MAC addresses to the same IP address. You can
set the IP address to 0.0.0.0 for multipleMAC
address. This means that all packets with theMAC
address are allowed continue through thefirewall
to be matched with a firewall policy.
0.0.0.0
mac <address_hex>
The MAC address to add to the IP/MAC binding
table. You can set the MAC address to
00:00:00:00:00:00 for multiple IP addresses.
00:00:00: 00:00:00
Summary of Contents for freeGuard 100
