196
option2 <option_code>
[<option_hex>]
The second custom DHCP option that can be sent by the
DHCP server. option_code is the DHCP option code in the
range 1 to 255. option_hex is an even number of
hexadecimal characters. For detailed information about
DHCP options, see RFC 2132, DHCP Options and BOOTP
Vendor Extensions.
No default.
option3 <option_code>
[<option_hex>]
The third custom DHCP option that can be sent by the DHCP
server. option_code is the DHCP option code in the range 1
to 255. option_hex is an even number of hexadecimal
characters. For detailed information about DHCP options,
see RFC 2132, DHCP Options and BOOTP Vendor
Extensions.
No default.
start-ip <address_ipv4> The starting IP for the range of IP addresses that this DHCP
server assigns to DHCP clients. The IP range is defined by
the start-ip and the end-ip.
0.0.0.0
wins-server1
<address_ipv4>
The IP address of the first WINS server that the DHCP
server assigns to DHCP clients.
0.0.0.0
wins-server2
<address_ipv4>
The IP address of the second WINS server that the DHCP
server assigns to DHCP clients.
0.0.0.0
Example
Use the following command to add a DHCP server named new_dhcp. This DHCP server assigns IP
addresses to computers connected to the same network as the internal interface. The IP addresses
assigned are in the range 192.168.33.100 to 192.168.33.200. The example DHCP configuration also
sets the netmask, default gateway, two DNS server IP addresses, the lease time, and one WINS
server.
config system dhcp server
edit new_dhcp
set interface internal
set start-ip 192.168.33.100
set end-ip 192.168.33.200
set netmask 255.255.255.0
set default-router 192.168.33.1
set dns_server1 56.34.56.96
set dns_server2 56.34.56.99
set lease-time 4000
set wins_server1 192.168.33.45
end
Summary of Contents for freeGuard 100
