freeGuard 100 CLI User Manual
237
Use the following command to add an SNMP manager with IP address 192.34.56.78 that connects to
the external interface of the freeGuard 100.
config system snmp
edit 1
config hosts
edit 1
set interface external
set ip 192.34.56.78
end
end
Command History
Related Commands
•
snmp sysinfo
10.28 snmp sysinfo
Use this command to enable the freeGuard 100 SNMP agent and to enter basic freeGuard 100
system information that is used by the freeGuard 100 SNMP agent. Use system information to identify
the freeGuard 100 so that when your SNMP manager receives configuration information or traps from
the freeGuard 100 you can identify the freeGuard 100 that sent the information.
Command syntax pattern
config system snmp sysinfo
set <keyword> <variable>
end
config system snmp sysinfo
unset <keyword>
end
get system snmp sysinfo
show system snmp sysinfo
snmp sysinfo command keywords and variables
Keywords & Variables Description
Default
contact_info <info_str>
Add the contact information for the person responsible for this
freeGuard 100. The contact information can be up to 35
characters long.
No
default
description <desc_str>
Add a name or description of the freeGuard 100. The description
can be up to 35 characters long.
No
default
Summary of Contents for freeGuard 100
