140
get router prefix-list [<name_str>]
show router prefix-list [<name_str>]
The configrouter prefix-list command has 1 subcommand.
config rule
config rule
Access the config rule subcommand using the router prefix-list command. Use the config rule
command to add, edit, or delete prefix list rules with the specified number.
Command syntax pattern
config rule
edit <id_integer>
set <keyword> <variable>
end
config rule
edit <id_integer>
unset <keyword> <variable>
end
config rule
delete <id_integer>
end
get router prefix-list [<name_str>] show router prefix-list [<name_str>]
rule command keywords and variables
Keywords & Variables Description
Default
action {deny | permit}
Set the action to take for this prefix.
permit
ge <length_integer>
Match prefix lengths that are greater than orequal to this
number. The setting for ge should be less than the setting
for le. The setting for geshould be greater than the
netmask set for prefix.
length_integer
can be any
number from 0 to 32.
0
le <length_integer>
Match prefix lengths that are less than or equal to this
number. The setting for le should be greater than the
setting for ge. length_integer can be any number from 0
to 32.
32
prefix
{<address_ipv4mask> |
any}
Enter the prefix (IP address and netmask) for this prefix
list rule or enter any to match any prefix. The length of
the netmask should be less thanthe setting for ge. If
prefix is set to any, ge and le should not be set.
0.0.0.0 0.0.0.0
Summary of Contents for freeGuard 100
