freeGuard 100 CLI User Manual
255
when you configure the tunnel, no negotiation is required for the VPN tunnel to start. However, the
VPN gateway or client that connects to this tunnel must use the same encryption and authentication
algorithms and must have the same encryption and authentication keys.
Command syntax pattern
config vpn ipsec manualkey
edit <name_str>
set <keyword> <variable>
end
config vpn ipsec manualkey
edit <name_str>
unset <keyword>
end
config vpn ipsec manualkey
delete <name_str>
end
get vpn ipsec manualkey [<name_str>]
show vpn ipsec manualkey [<name_str>]
ipsec manualkey command keywords and variables
Keywords & Variables
Description
Default
authentication {md5 |
null | sha1}
Select an authentication algorithm from the list.
Make sure you use the same algorithm at both
ends of the tunnel.
null
authkey
<authentication-
key_hex>
If authentication is md5, enter a 32 digit (16 byte)
hexadecimal number. Separate each 16 digit (8
byte) hexadecimal segment with a hyphen. If
authentication is sha1, enter a 40 digit (20 byte)
hexadecimal number. Use a hyphen to separate
the first 16 digits (8 bytes) from the remaining 24
digits (12 bytes). Digits can be 0 to 9, and a to f.
Use the same authentication key at both ends of
the tunnel.
No default.
concentrator
<name_str>
The name of a concentrator to which to add the
manual key tunnel.
No default.
Summary of Contents for freeGuard 100
