210
set monitor external enable
set monitor_priority internal 200
set monitor internal enable
set monitor_priority internal 100
set monitor dmz enable
set monitor_priority internal 50
end
The following example shows how to configure weighted round robin weights for a cluster of three
freeGuard 100s. You can enter the following commands to configure the weight values for each unit:
Table 4: Example weights for three cluster units
Cluster unit priority
Weight
0
1
1
3
2
3
config system ha
set schedule weight-round-robin
set weight 0 1
set weight 1 3
set weight 2 3
end
These commands have the following results:
•
The first connection is processed by the primary unit (priority 0, weight 1)
•
The next three connections are processed by the first subordinate unit (priority 1, weight 3)
•
The next three connections are processed by the second subordinate unit (priority 2, weight 3)
The subordinate units process more connections than the primary unit, and both subordinate units, on
average, process the same number of connections.
This example shows how to display the settings for the system ha command.
get system ha
Summary of Contents for freeGuard 100
