freeGuard 100 CLI User Manual
191
end
get system console
show system console
console command keywords and variables
Keywords & Variables Description
Default
baudrate {9600 | 19200
| 38400 | 57600 |
115200}
Set the console port baudrate.
9600
mode {batch | line}
Set the console mode to line or batch. Used for autotesting only. line
output {standard |
more}
Set console output to standard (no pause) or more(pause after
each screenful, resume on keypress).
standard
Example
This example shows how to set the baudrate to 38400 and set the number of lines per page to 25.
config system console
set baudrate 38400
set page 25
end
This example shows how to display the settings for the console command.
get system console
This example shows how to display the configuration for the console command.
show system console
Command History
10.10 dhcp exclude_range
Use this command to add up to 16 exclusion ranges of IP addresses that freeGuard 100 DHCP
servers cannot assign to DHCP clients. Exclusion ranges apply to all freeGuard 100 DHCP servers.
Note:
For this configuration to take effect you must set the interface to DHCP server mode using the
dhcpserver-mode keyword in the config system interface command.
Command syntax pattern
config system dhcp exclude_range
edit <index_integer>
Summary of Contents for freeGuard 100
