44
end
config firewall address
delete <name_str>
end
get firewall address [<name_str>]
show firewall address [<name_str>]
firewall address command keywords and variables
Keywords & Variables Description
Default
subnet
<address_ipv4mask>
If type is set to ipmask, the IP Address can be the IP
address of a single computer (for example,
192.45.46.45) or the address of asubnetwork (for
example, 192.168.1.0). The Netmask should
correspond to the address that you are adding. For
example:
• The netmask for the IP address of a singlecomputer
should be 255.255.255.255.
• The netmask for a class A subnet should be
255.0.0.0.
• The netmask for a class B subnet should be
255.255.0.0.
• The netmask for a class C subnet should be
255.255.255.0.
0.0.0.0 0.0.0.0
end_ip <address_ipv4> If type is set to iprange enter the end IP Address for
the range.
0.0.0.0
start_ip
<address_ipv4>
If type is set to iprange enter the start IP Address for
the range.
0.0.0.0
type {ipmask | iprange} Specify whether this firewall address is a subnet
address or an address range.
ipmask
Example
This example shows how to add an address called User_Network, with an IP address and mask, and
add an address called User_Range, with an IP address range.
config firewall address
edit User_Network
set type ipmask
set subnet 192.168.1.0 255.255.255.0
next
edit User_Range
Summary of Contents for freeGuard 100
