54
delete <id_integer>
end
get firewall multicast-policy [<id_integer>]
show firewall multicast-policy [<id_integer>]
firewall multicast-policy command keywords and variables
Keywords & Variables Description
Default
dstaddr
<address_ipv4mask>
Enter the destination IP address and netmask to
match against multicast NAT packets.
0.0.0.0 0.0.0.0
Dstintf <name_str>
Enter the destination interface name to match
against multicast NAT packets.
No default.
nat <address_ipv4>
Enter the IP address to substitute for the original
source IP address.
0.0.0.0
srcaddr
<address_ipv4mask>
Enter the source IP address and netmask to
match against multicast NAT packets.
0.0.0.0 0.0.0.0
srcintf
<name_str>
Enter the source interface name to match
against multicast NAT packets.
No default.
Example
This example shows how to configure a multicast NAT policy.
config firewall multicast-policy
edit 1
set dstaddr 10.0.0.1 255.255.255.0
set dstintf dmz/ha
set nat 10.0.1.1
set srcaddr 192.168.100.12 255.255.255.0
set srcintf internal
end
This example shows how to display the settings for the firewall multicast-policy command.
get firewall multicast-policy
This example shows how to display the settings for the id 1 multicast policy.
get firewall multicast-policy 1
This example shows how to display the configuration for the firewall multicast-policy command.
show firewall multicast-policy
This example shows how to display the configuration for the id 1 multicast policy.
show firewall multicast-policy 1
Summary of Contents for freeGuard 100
