4-5
HWTACACS authentication configuration example
z
The administrator configures the user level switching authentication policies.
# Configure a HWTACACS authentication scheme named
acs
, and specify the user name and
password used for user level switching on the HWTACACS server defined in the scheme. Refer to
AAA
Operation
for detailed configuration procedures.
# Enable HWTACACS authentication for VTY 0 user level switching.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] super authentication-mode scheme
[Sysname-ui-vty0] quit
# Specify to adopt the HWTACACS authentication scheme named
acs
for user level switching in the
ISP domain named system.
[Sysname] domain system
[Sysname-isp-system] authentication super hwtacacs-scheme acs
z
A VTY 0 user switches its level to level 3 after logging in.
# Switch to user level 3 (assuming that you log into the switch as a VTY 0 user by Telnet).
<Sysname> super 3
Username: user@system
Password:
User privilege level is 3, and only those commands can be used
whose level is equal or less than this.
Privilege note: 0-VISIT, 1-MONITOR, 2-SYSTEM, 3-MANAGE
