Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
107
of
272
Command
:
vlan
Description
:
VLAN config commands in Config mode and in Config-vlan mode.
Syntax
:
vlan
<vlist>
vlan
ethertype s-custom-port <etype>
vlan
protocol { { eth2 { <etype> | arp | ip | ipx | at } } | { snap { <oui> | rfc-1042 | snap-8021h } <pid> } | { llc
<dsap> <ssap> } } group <grp_id>
Parameters
: <vlan_list>
ISL VLAN IDs 1~4095
Ethertype
EtherType for Custom S-ports
protocol
Protocol-based VLAN commands
s-custom-port
Custom S-ports configuration
<0x0600-0xffff> EtherType (Range: 0x0600-0xffff)
eth2
Ethernet-based VLAN commands
llc
LLC based VLAN group
snap
SNAP-based VLAN group
<0x600-0xffff>
Ether Type (Range: 0x600 - 0xFFFF)
arp Ether Type is ARP
at Ether Type is AppleTalk
ip Ether Type is IP
ipx Ether Type is IPX
group
Protocol-based VLAN group commands
<word16>
Group Name (Range: 1 - 16 characters)
<0x0-0xff>
DSAP (Range: 0x00 - 0xFF)
<0x0-0xff>
SSAP (Range: 0x00 - 0xFF)
<0x0-0xffffff>
SNAP OUI (Range 0x000000 - 0XFFFFFF)
rfc-1042 SNAP OUI is rfc-1042
snap-8021h SNAP OUI is 8021h
<0x0-0xffff>
PID (Range: 0x0 - 0xFFFF)
<word31>
The ASCII name for the VLAN
Example 1
: In Config mode:
SISPM1040-582-LRT(config)#
vlan protocol eth2 arp group 123
SISPM1040-582-LRT(config)#
vlan ethertype s-custom-port 0x1111
SISPM1040-582-LRT(config)#
vlan 100
SISPM1040-582-LRT(config)#
vlan 1,2,10-20,100-300
SISPM1040-582-LRT(config)#
Example 2
: In VLAN Config mode:
SISPM1040-582-LRT(config)#
vlan 1,2,10-20,100-300
SISPM1040-582-LRT(config-vlan)#
?
do To run exec commands in config mode
end Go back to EXEC mode
exit Exit from current mode
help Description of the interactive help system
name ASCII name of the VLAN
no
SISPM1040-582-LRT(config)#
vlan 10
SISPM1040-582-LRT(config-vlan)#
name VID-10
SISPM1040-582-LRT(config-vlan)#
Messages
:
% Cannot modify name for multiple VLANs
