Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
129
of
272
20 PTP Commands
Command
:
ptp
Description
:
Miscellaneous non-persistent 1588 settings.
Note
that there are also Config mode ptp commands
available.
Syntax
:
ptp
<clockinst> local-clock { update | ratio <ratio> }
ptp
<clockinst> wireless delay <base_delay> [ <incr_delay> ] interface ( <port_type> [ <v_port_type_list> ] )
ptp
<clockinst> wireless mode interface ( <port_type> [ <v_port_type_list> ] )
ptp
<clockinst> wireless pre-notification interface ( <port_type> [ <v_port_type_list> ] )
Parameters
:
<0-3>
PTP Clock instance [0-3].
local-clock
Update local clock current time, or set clock ratio.
wireless
Enable wireless mode for one or more interfaces.
ratio
Set the local master clock frequency ratio.
update
The local clock is synchronized to the system clock.
<-10000000-10000000> Ratio in units of 0,1 PPB, (ratio > 0 => faster clock, ratio < 0 => slower clock).
delay
Base wireless transmission delay.
mode
Enable wireless mode for an interface.
pre-notification Issue a pre notification that the wireless modem is going to change.
<0-1000000000> Base wireless transmission delay (in pico seconds).
<0-1000000> Incremental wireless transmission delay pr. byte (in pico seconds)
interface
Interface parameter.
*
All switches or All ports
GigabitEthernet 1 Gigabit Ethernet Port
<port_type_list> Port list in 1/1-10
Example
:
SISPM1040-582-LRT#
ptp 0 local-clock ratio 1
SISPM1040-582-LRT#
ptp 0 wireless delay 5000 75000 interface GigabitEthernet 1/8
Wireless mode not available for ptp instance 0, port 8
SISPM1040-582-LRT#
ptp 0 local-clock update
SISPM1040-582-LRT#
show ptp 0 local-clock
PTP Time (0) : 2011-01-01T05:01:24-08:00 346,946,300
Clock Adjustment method: Internal Timer
SISPM1040-582-LRT#
