Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
11
of
272
Command
:
dot1x
Description
: IEEE Standard for port-based Network Access Control in Exec mode.
Syntax
:
dot1x
initialize [ interface ( <port_type> [ <plist> ] ) ]
Parameters
: initialize
Force re-authentication immediately
interface
Interface
*
All switches or All ports
GigabitEthernet 1 Gigabit Ethernet Port
<port_type_list> Port list in 1/1-10
Example
:
SISPM1040-582-LRT#
dot1x initialize interface * 1/5 GigabitEthernet 1/5
SISPM1040-582-LRT#
dot1x initialize
SISPM1040-582-LRT#
Command
:
Exit
Description
: Exit from EXEC mode.
Syntax
:
exit
Parameters
: None
Example
:
SISPM1040-582-LRT#
exit
Username:
Password:
Wrong username or password!
Username:
admin
Password:
SISPM1040-582-LRT#
con ter
SISPM1040-582-LRT(config)#
exit
SISPM1040-582-LRT#
exit?
exit Exit from EXEC mode
<cr>
SISPM1040-582-LRT#
