Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
220
of
272
Command
:
ipv6
Description
:
Configure IPv6 parameters for an interface.
Syntax
:
ipv6
mld snooping filter <profile_name>
ipv6
mld snooping immediate-leave
ipv6
mld snooping max-groups <throttling>
ipv6
mld snooping mrouter
Parameters
: mld
Multicast Listener Discovery
snooping
Snooping MLD
filter Access control on MLD multicast group registration
immediate-leave Immediate leave configuration
max-groups MLD group throttling configuration
mrouter Multicast router port configuration
<word16>
Profile name in 16 char's
<1-10>
Maximum number of MLD group registration
Example
:
SISPM1040-582-LRT(config-if)#
ipv6 mld snooping max-groups 6
SISPM1040-582-LRT(config-if)#
ipv6 mld snooping mrouter
SISPM1040-582-LRT(config-if)#
ipv6 mld snooping immediate-leave
SISPM1040-582-LRT(config-if)#
SISPM1040-582-LRT(config-if)#
end
SISPM1040-582-LRT#
show ipv6 mld snooping mrouter
MLD Snooping is disabled to stop snooping MLD control plane.
Switch-1 MLD Router Port Status
Gi 1/1: Static and Dynamic Router Port
Gi 1/2: Static and Dynamic Router Port
Gi 1/3: Static and Dynamic Router Port
Gi 1/4: Static and Dynamic Router Port
Gi 1/5: Static and Dynamic Router Port
Gi 1/6: Static and Dynamic Router Port
Gi 1/7: Static and Dynamic Router Port
Gi 1/8: Static and Dynamic Router Port
Gi 1/9: Static and Dynamic Router Port
Gi 1/10: Static and Dynamic Router Port
SISPM1040-582-LRT#
Messages
:
% Please specify correct filter profile name.
% Failed to set filtering profile Prof1.
