Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
99
of
272
Command
:
mode
Description
:
Configure Spanning tree mode
Syntax
:
spanning-tree
mode { stp | rstp | mstp }
Parameters
: mstp Multiple Spanning Tree (802.1s)
rstp Rapid Spanning Tree (802.1w)
stp 802.1D Spanning Tree
Example
:
SISPM1040-582-LRT(config)#
spanning-tree mode stp
SISPM1040-582-LRT(config)#
spanning-tree mode rstp
SISPM1040-582-LRT(config)#
Command
:
mst
Description
:
Configure Spanning tree MST.
Syntax
:
spanning-tree
mst <instance> priority <prio>
spanning-tree
mst <instance> vlan <v_vlan_list>
spanning-tree
mst forward-time <fwdtime>
spanning-tree
mst hello-time <hellotime>
spanning-tree
mst max-age <maxage> [ forward-time <fwdtime> ]
spanning-tree
mst max-hops <maxhops>
spanning-tree
mst name <name> revision <v_0_to_65535>
Parameters
: <0-7>
instance 0-7 (CIST=0, MST2=1...)
forward-time Delay between port states
hello-time
MSTP bridge hello time
max-age
Max bridge age before timeout
max-hops
MSTP bridge max hop count
name
Name keyword
Example
:
SISPM1040-582-LRT(config)# s
panning-tree mst 7 vlan 10
SISPM1040-582-LRT(config)#
Command
:
recovery
Description
:
Configure Spanning tree recovery interval
Syntax
:
spanning-tree
recovery interval <interval>
Parameters
: interval The interval <30-86400> Range in seconds
Example
:
SISPM1040-582-LRT(config)#
spanning-tree recovery interval 6000
SISPM1040-582-LRT(config)