Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
76
of
272
Command
:
ntp
Description
:
Configure NTP server.
Syntax
:
ntp
ntp
automatic
ntp
interval <interval>
ntp
server <index_var> ip-address { <ipv4_var> | <ipv6_var> | <name_var> }
Parameters
: automatic
Configure Automatic
interval
Configure NTP Time-Sync Interval
server
Configure NTP server
<5,10,15,30,60,120> Time-Sync Interval in seconds
<1-5>
index number
ip-address
ip address
<domain_name> domain name
<ipv4_ucast>
ipv4 address
<ipv6_ucast>
ipv6 address
Example
:
SISPM1040-582-LRT(config)#
ntp server 1 ip-address 192.168.1.70
SISPM1040-582-LRT(config)#
ntp server 1 ip-address domain1
SISPM1040-582-LRT(config)#
ntp server 1 ip-address 1.2.3.4
SISPM1040-582-LRT(config)#
ntp interval 10
SISPM1040-582-LRT(config)#
ntp automatic
SISPM1040-582-LRT(config)#
exit
SISPM1040-582-LRT#
show ntp status
NTP Mode : disabled
Automatic: enabled
Idx Server IP host address (a.b.c.d)
--- ------------------------------------------------------
1
Idx Server IP host address (a.b.c.d) or a host name string
--- ------------------------------------------------------
1 2.4.6.8
2
3
4
5
SISPM1040-582-LRT#
Command
:
percepxion
Description
:
Appendix C Percepxion and LPM Commands
on page
Syntax
:
Parameters
:
Example
: