Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
57
of
272
Command
:
ipv6
Description
:
IPv6 configuration commands.
Syntax
:
ipv6
mld host-proxy [ leave-proxy ]
ipv6
mld snooping
ipv6
mld snooping vlan <v_vlan_list>
ipv6
mld ssm-range <v_ipv6_mcast> <ipv6_prefix_length>
ipv6
mld unknown-flooding
ipv6
route <v_ipv6_subnet> { <v_ipv6_ucast> | interface vlan <v_vlan_id> <v_ipv6_addr> }
Parameters
:
mld
Multicast Listener Discovery
route
Configure static routes
host-proxy MLD proxy configuration
snooping Snooping MLD
ssm-range IPv6 address range of Source Specific Multicast
unknown-flooding Flooding unregistered IPv6 multicast traffic
leave-proxy
MLD proxy for leave configuration
vlan
MLD VLAN
<vlan_list>
VLAN identifier(s): VID
<ipv6_mcast>
Valid IPv6 multicast address
<ipv6_subnet>
IPv6 prefix x:x::y/z
<ipv6_ucast>
IPv6 unicast address (except link-local address) of next-hop
interface
Select an interface to configure
vlan
VLAN Interface
<vlan_id>
VLAN identifier(s): VID
<ipv6_linklocal> IPv6 link-local address of next-hop
<8-128>
Prefix length ranges from 8 to 128
Example
:
SISPM1040-582-LRT(config)#
ipv6 mld host-proxy leave-proxy
SISPM1040-582-LRT(config)#
ipv6 mld snooping vlan 1
SISPM1040-582-LRT(config)#
ipv6 route??
ipv6 route <v_ipv6_subnet> { <v_ipv6_ucast> | interface vlan <v_vlan_id> <v_ipv6_addr> }
SISPM1040-582-LRT(config)#
ipv6 mld unknown-flooding
SISPM1040-582-LRT(config)#
ipv6 mld ssm-range ff02::1 12
SISPM1040-582-LRT(config)#
ipv6 route fd00::/8 2001:0db8:85a3:0000:0000:8a2e:0370:7334
SISPM1040-582-LRT(config)#
Messages:
% Invalid operation for gateway address assignment.
% Link-local address will not be accepted!
