Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
29
of
272
access-list
rate-limiter [ <rate_limiter_list> ] { pps <pps_rate> | 10pps <pps10_rate> | 100pps <pps100_rate> |
25kbps <kpbs25_rate> | 100kbps <kpbs100_rate> }
Parameters
:
<1-256>
ACE ID
update
Update an existing ACE
ace
Access list entry
action Access list action
dmac-type The type of destination MAC address
evc-policer
EVC policer
frametype Frame type
ingress
Ingress
logging Logging frame information
lookup Second lookup
mirror Mirror frame to destination mirror port
next insert the current ACE before the next ACE ID
policy Policy
rate-limiter
Rate limiter
redirect Redirect frame to specific port
shutdown Shutdown incoming port
tag Tag
tag-priority
Tag priority
vid VID field
deny
Deny
filter
Filter
permit
Permit
any
Don't-care the type of destination MAC address
broadcast
Broadcast destination MAC address
multicast
Multicast destination MAC address
unicast
Unicast destination MAC address
any
Don't-care the frame type
arp
Frame type of ARP
etype
Frame type of etype
ipv4
Frame type of IPv4
ipv4-icmp
Frame type of IPv4 ICMP
ipv4-tcp
Frame type of IPv4 TCP
ipv4-udp
Frame type of IPv4 TCP
ipv6
Frame type of IPv4
ipv6-icmp
Frame type of IPv6 ICMP
ipv6-tcp
Frame type of IPv6 TCP
ipv6-udp
Frame type of IPv6 UDP
interface
Select an interface to configure
<port_type>
Gigabitethernet
*
All switches or All ports
Gigabitethernet
1 Gigabit Ethernet port
<port_type_id>
Port ID in the format of switch-no/port-no ex, 1/1-10 for Gigabitethernet
<port_type>
* or Gigabitethernet
<port_type_list> Port list in 1/1-10
any
Don't-care the ingress interface
