Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
216
of
272
Command
:
exit
Description
:
Exit from current mode.
Syntax
:
exit
<cr>
Parameters
: None.
Example
:
SISPM1040-582-LRT(config-if)#
exit
SISPM1040-582-LRT(config)#
Command
:
excessive-restart
Description
:
Restart backoff algorithm after 16 collisions for an interface. No excessive-restart means discard
frame after 16 collisions.
Syntax
:
excessive-restart <cr>
Parameters
: <cr>
Example
:
SISPM1040-582-LRT(config-if)#
excessive-restart
SISPM1040-582-LRT(config-if)#
Command
:
flowcontrol
Description
:
Enable or disable Traffic flow control for an interface.
Syntax
:
flowcontrol { on | off }
Parameters
: off Disable flow control.
on Enable flow control.
Example
:
SISPM1040-582-LRT(config-if)#
flowcontrol on
SISPM1040-582-LRT(config-if)#
Command
:
frame-length-check
Description
:
Drop frames with mismatch between EtherType/Length field and actually payload size for an
interface.
Syntax
:
frame-length-check <cr>
Parameters
: <cr>
Example
:
SISPM1040-582-LRT(config-if)#
frame-length-check
SISPM1040-582-LRT(config-if)#
