Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
64
of
272
Command
:
mep
Description
:
Configure Maintenance Entity Point.
Syntax
:
mep
<inst> [ mip ] { up | down } domain { port | evc | vlan | tp-link | tunnel-tp | pw | lsp } [ vid <vid> ] [ flow
<flow> ] level <level> [ interface <port_type> <port> ]
mep
<inst> ais [ fr1s | fr1m ] [ protect ]
mep
<inst> aps <prio> [ multi | uni ] { laps | { raps [ octet <octet> ] } }
mep
<inst> cc <prio> [ fr300s | fr100s | fr10s | fr1s | fr6m | fr1m | fr6h ]
mep
<inst> ccm-tlv
mep
<inst> client domain { evc | vlan | lsp } flow <cflow> [ level <level> ] [ ais-prio [ <aisprio> | ais-highest ] ] [
lck-prio [ <lckprio> | lck-highest ] ]
mep
<inst> dm <prio> [ multi | { uni mep-id <mepid> } ] [ single | dual ] [ rdtrp | flow ] interval <interval> last-n
<lastn>
mep
<inst> dm bin fd <num_fd_var>
mep
<inst> dm bin ifdv <num_ifdv_var>
mep
<inst> dm bin threshold <threshold_var>
mep
<inst> dm ns
mep
<inst> dm overflow-reset
mep
<inst> dm proprietary
mep
<inst> dm synchronized
mep
<inst> lb <prio> [ dei ] [ multi | { uni { { mep-id <mepid> } | { mac <mac>} } } | mpls ttl <mpls_ttl> ] count
<count> size <size> interval <interval>
mep
<inst> lck [ fr1s | fr1m ]
mep
<inst> level <level>
mep
<inst> link-state-tracking
mep <inst> lm <prio> [ multi | uni ] [ single | dual ] [ fr10s | fr1s | fr6m | fr1m | fr6h ] [ flr <flr> ] [ threshold
<loss_th> ]
mep
<inst> lm flow-counting
mep
<inst> lm oam-counting { [ y1731 | all ] }
mep
<inst> lm-avail interval <interval> flr-threshold <flr_th>
mep
<inst> lm-avail maintenance
mep
<inst> lm-hli flr-threshold <flr_th> interval <interval>
mep
<inst> lm-notif los-int-cnt-holddown <los_int_cnt_holddown> los-th-cnt-holddown <los_th_cnt_holddown>
hli-cnt-holddown <hli_cnt_holddown>
mep
<inst> lm-sdeg tx-min <tx_min> flr-threshold <flr_th> bad-threshold <bad_th> good-threshold <good_th>
mep
<inst> lt <prio> { { mep-id <mepid> } | { mac <mac> } } ttl <ttl>
mep
<inst> meg-id <megid> { itu | itu-cc | { ieee [ name <name> ] } }
mep
<inst> mep-id <mepid>
mep
<inst> peer-mep-id <mepid> [ mac <mac> ]
mep
<inst> performance-monitoring
mep
<inst> syslog
mep
<inst> tst <prio> [ dei ] mep-id <mepid> [ sequence ] [ all-zero | all-one | one-zero ] rate <rate> size <size>
mep
<inst> tst rx
mep
<inst> tst tx
mep
<inst> vid <vid>
mep
<inst> voe
mep
os-tlv oui <oui> sub-type <subtype> value <value>
