Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
223
of
272
Command
:
lldp
Description
:
Configure LLDP parameters for an interface.
Syntax
:
lldp
cdp-aware
lldp
med media-vlan policy-list <v_range_list>
lldp
med transmit-tlv [ capabilities ] [ location ] [ network-policy ] [ poe ]
lldp
med type { connectivity | end-point }
lldp
receive
lldp
tlv-select { management-address | port-description | system-capabilities |system-description | system-name }
lldp
transmit
Parameters
:
cdp-aware Configures if the interface shall be CDP aware (CDP discovery information is added to the LLDP
neighbor table)
med
Media Endpoint Discovery.
receive Enable/Disable decoding of received LLDP frames.
tlv-select Which optional TLVs to transmit.
transmit Enable/Disabled transmission of LLDP frames.
media-vlan Media VLAN assignment.
transmit-tlv LLDP-MED Location Type Length Value parameter.
type Select if the interface is working as "Network Connectivity Device" or an "Endpoint Device".
The difference between working as "Network Connectivity Device" and an "Endpoint Device" is a
question of who is initializing the LLDP-MED TVLs transmission. A "Network Connectivity Device"
is not starting LLDP-MED TLVs transmission until it has detected an "Endpoint Device" as link
partner. An "Endpoint Device" will start LLDP-MED TLVs transmission at once.
management-address Enable/Disable transmission of management address.
port-description
Enable/Disable transmission of port description.
system-capabilities Enable/Disable transmission of system capabilities.
system-description Enable/Disable transmission of system description.
system-name Enable/Disable transmission of system name.
connectivity
Work as connectivity device.
end-point
Work as end-point device.
capabilities
Enable transmission of the optional capabilities TLV.
location Enable transmission of the optional location TLV.
network-policy
Enable transmission of the optional network-policy TLV.
poe Enable/Disable transmission of the optional PoE TLV.
Example
:
SISPM1040-582-LRT(config-if)#
lldp cdp-aware
SISPM1040-582-LRT(config-if)#
lldp receive
SISPM1040-582-LRT(config-if)#
lldp tlv-select management-address
SISPM1040-582-LRT(config-if)#
lldp tlv-select system-capabilities
SISPM1040-582-LRT(config-if)#
lldp transmit
SISPM1040-582-LRT(config-if)#
lldp med transmit-tlv capabilities location network-policy poe
SISPM1040-582-LRT(config-if)#