Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
58
of
272
Command
:
lacp
Description
:
Configure LACP settings. The LACP on Air feature provides LACP link aggregation via a wireless
AP.
Syntax
:
lacp
on-air index <v_1_to_8> { { port <port_type> <in_port_type_id> } | { couple-ip <ip1> <ip2> } }
lacp
system-priority <v_1_to_65535>
Parameters
:
on-air
Lets you set up LACP on Air ports and the Couple IP address for access management.
system-priority
System priority
lacp system-priority <v_1_to_65535>
<1-65535>
Priority value, lower means higher priority
index
Index
<1-8>
1-8 (lacp on-air index)
couple-ip
Set couple ip address
port
Port
<ipv4_addr>
IPv4 Address
<ipv4_addr>
IPv4 Address
GigabitEthernet 1 Gigabit Ethernet Port
<port_type_id> Port ID in 1/1-10
<cr>
Example
:
SISPM1040-582-LRT(config)#
lacp system-priority 333
SISPM1040-582-LRT(config)#
do show lacp system
System Priority: 300
SISPM1040-582-LRT(config)#
$r index 1 couple-ip 192.168.1.30 192.168.1.40
SISPM1040-582-LRT(config)#
lacp on-air index 1 port ?
GigabitEthernet 1 Gigabit Ethernet Port
SISPM1040-582-LRT(config)#
lacp on-air index 1 port GigabitEthernet 1/2
SISPM1040-582-LRT(config)#
$r index 1 couple-ip 192.168.1.77 192.168.1.78
SISPM1040-582-LRT(config)#
do show lacp on-air
LACP On Air configuration
Index Port Couple IP
----- -------- --------------- ---------------
1 Disabled 192.168.1.77 192.168.1.78
2 2 192.168.1.77 0.0.0.0
3 3 0.0.0.0 0.0.0.0
4 Disabled 0.0.0.0 0.0.0.0
5 Disabled 0.0.0.0 0.0.0.0
6 Disabled 0.0.0.0 0.0.0.0
7 Disabled 0.0.0.0 0.0.0.0
8 Disabled 0.0.0.0 0.0.0.0
SISPM1040-582-LRT(config)#
lacp on-air index 1 couple-ip 199.11.9.1 189.33.16.5
SISPM1040-582-LRT(config)#
