Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
202
of
272
Command
:
vlan
Description
:
Show VLAN status.
Syntax
:
show
vlan [ id <vlan_list> | name <name> | brief ] [ all ]
show
vlan ip-subnet [ <ipv4> ]
show
vlan mac [ address <mac_addr> ]
show
vlan membership [ id <vlan_list> | name <name> ] [ admin | combined | erps | evc | gvrp | mep | mstp |
mvr | nas | rmirror | vcl | voice-vlan | dms | mrp | forbidden ]
show
vlan protocol [ eth2 { <etype> | arp | ip | ipx | at } ] [ snap { <oui> | rfc-1042 | snap-8021h } <pid> ] [ llc
<dsap> <ssap> ]
show
vlan status [ interface ( <port_type> [ <plist> ] ) ] [ admin | all | combined | conflicts | erps | evc | gvrp |
mep | mstp | mvr | nas | rmirror | vcl | voice-vlan ]
Parameters
: all
Show all VLANs (if left out only access VLANs are shown)
brief VLAN summary information
id
VLAN status by VLAN id
ip-subnet Show VCL IP Subnet entries.
mac Show VLAN MAC entries.
membership VLAN membership
name VLAN status by VLAN name
protocol Protocol-based VLAN status
status Show the VLANs configured for each interface.
eth2
Ethernet protocol based VLAN status
llc
LLC based VLAN status
snap
SNAP-based VLAN status
<0x600-0xffff> Ether Type (Range: 0x600 - 0xFFFF)
arp Ether Type is ARP
at Ether Type is AppleTalk
ip Ether Type is IP
ipx Ether Type is IPX
<0x0-0xff> DSAP (Range: 0x00 - 0xFF)
<0x0-0xff> SSAP (Range: 0x00 - 0xFF)
admin Show the VLANs configured by administrator.
all Show VLANs configured VLANs for all VLAN users.
combined Show the combined set of configured VLANs.
conflicts Show VLAN configurations that have conflicts.
erps Show the VLANs configured by ERPS.
gvrp
Show the VLANs configured by GVRP.
interface Show the VLANs configured for a specific interface or interfaces.
mep Show the VLANs configured by MEP.
mstp Show the VLANs configured by MSTP.
mvr Show the VLANs configured by MVR.
nas
Show the VLANs configured by NAS.
rmirror Show the VLANs configured by Remote mirroring.
vcl Show the VLANs configured by VCL.
voice-vlan Show the VLANs configured by Voice VLAN.
interface Show the VLANs configured for a specific interface or interfaces.
* All switches or All ports
