Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
67
of
272
Command
:
monitor
Description
:
Configure a Mirror session.
Syntax
:
monitor
session <session_number> [ destination { interface ( <port_type> [ <di_list> ] ) | remote
vlan <drvid> reflector-port <port_type> <rportid> } | source { interface ( <port_type> [ <si_list> ] )
[ both | rx | tx ] | remote vlan <srvid> | vlan <source_vlan_list> | cpu [ both | rx | tx ] } |
intermediate { interface ( <port_type> [ <ii_list> ] ) | remote vlan <irvid> } ]
Parameters
: session
Configure a MIRROR session
<1>
MIRROR session number
destination
MIRROR destination interface or VLAN
intermediate
MIRROR intermediate interface, VLAN
source
MIRROR source interface, VLAN
interface
MIRROR destination interface
remote
MIRROR destination Remote
*
All switches or All ports
GigabitEthernet 1 Gigabit Ethernet Port
<port_type_list> Port list for all port types
<port_type_list> Port list in 1/1-10
interface
MIRROR intermediate interface
remote
MIRROR intermediate Remote
vlan
MIRROR intermediate Remote number
<vlan_id>
Remote MIRROR intermediate RMIRROR VLAN number
cpu
MIRROR source CPU
interface
MIRROR source interface
remote
MIRROR source Remote
vlan
MIRROR source VLAN
both
MIRROR source CPU receive both
rx
MIRROR source CPU receive Rx
tx
MIRROR source CPU receive Tx
<vlan_id>
Remote MIRROR source RMIRROR VLAN number
<vlan_list>
MIRROR source VLAN
reflector-port
Remote MIRROR reflector interface
<port_type_id> Remote MIRROR reflector interface number
Example
:
SISPM1040-582-LRT(config)#
monitor session 1 destination remote vlan 200 ?
reflector-port Remote MIRROR reflector interface
SISPM1040-582-LRT(config)#
$ destination remote vlan 200 reflector-port ?
GigabitEthernet 1 Gigabit Ethernet Port
SISPM1040-582-LRT(config)#
$ote vlan 200 reflector-port GigabitEthernet 1/6
% Any device connected to a port set as a reflector port loses connectivity until the Remote Mirroring
is disabled.
SISPM1040-582-LRT(config)#
monitor session 1 intermediate interface *
SISPM1040-582-LRT(config)#
monitor session 1 intermediate remote vlan 100
SISPM1040-582-LRT(config)#
Messages:
% Interface GigabitEthernet 1/7 already configured as destination port.
% Any device connected to a port set as a reflector port loses connectivity until the Remote Mirroring is disabled.