Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
234
of
272
tag-remark Tag remarking configuration
trust Trust configuration
wrr Weighted round robin configuration
<0-7>
Specific class of service
<0-1>
Specific Drop Eligible Indicator
<0-1>
Specific drop precedence level
any
Classify to new DSCP always
selected
Classify to new DSCP if classify is enabled for specific DSCP value in global
dscp-classify map
zero
Classify to new DSCP if DSCP is 0
remap
Rewrite DSCP field using classified DSCP and DPL=0 remapped
through global dscp-egress-translation map
remap-dp
Rewrite DSCP field using classified DSCP and DPL remapped
through global dscp-egress-translation map
rewrite
Rewrite DSCP field with classified DSCP value (no translation)
cos-tag
Map for cos to tag configuration
tag-cos
Map for tag to cos configuration
<0-7>
Specific Priority Code Point
<uint>
Policer rate <100-3276700>(kbps) or <1-3276>(mbps) or
<100-3276700>(fps) or <1-3276>(kfps).
addr
Setup address match mode
destination
Match DMAC and DIP
source
Match SMAC and SIP (default)
queue
Specify queue
<0~7>
Specific queue or range
uint>
Internally rounded up to the nearest value supported by the port shaper.
Shaper rate <100-3281943>(kbps) or <1-3281>(mbps).
kbps
Unit is kilobits per second (default)
mbps
Unit is Megabits per second
mapped
Used mapped values (cos,dpl -> pcp,dei)
pcp
Specify default PCP
<0-7>
Specific PCP
dei
Specify default DEI
<0-1>
Specific DEI
<1-100>
Weight for queue 1
<1-100>
Weight for queue 2
<1-100>
Weight for queue 3
<1-100>
Weight for queue 4
<1-100>
Weight for queue 5
Example
:
SISPM1040-582-LRT(config-if)#
qos dscp-translate
SISPM1040-582-LRT(config-if)#
qos shaper 90 mbps
SISPM1040-582-LRT(config-if)#
qos tag-remark mapped
SISPM1040-582-LRT(config-if)#
qos tag-remark pcp 2 dei 0
SISPM1040-582-LRT(config-if)#
qos trust dscp
SISPM1040-582-LRT(config-if)#
qos trust tag
SISPM1040-582-LRT(config-if)#
qos wrr 25 50 75 20 35 70
SISPM1040-582-LRT(config-if)#
