C
ONFIGURATION
C
OMMAND
S
ET
- F
IRMWARE
R
EVISION
2.4.0_
BETA
-
V
ERSION
1.0.0
Notes
•
When the device resets all TCP data are cleared.
3.2.23.9 TCP.SMTP.CONNECT
Parameter syntax
TCP.SMTP.CONNECT=<
enable
This parameter allows you to configure the sending of E-Mail via an Internet mail
server. This parameter opens a connection to the SMTP server using the
mail_server_address
values when the MAMBOII attempts to
send E-Mail messages.
<enable>
Enables/disables the sending of E-Mail via an Internet mail server. Following
values can be used:
Value
Meaning
0
Disables sending of E-Mail.
1
Enables sending of E-Mail.
<
mail_server_address
>
It specifies a string used to identify the address of the remote computer system. It
can contain an IP address in dotted-decimal form, such as "
129.3.1.24
", or a
computer name, such as "
smtp.mail.yahoo.com
".
Sending email from your MAMBOII device over GPRS will probably be
connecting using the GPRS service of your network operator, and will need to
use your ISPs SMTP server, not their SMTP server. As an example, if you use
D1
as
your GPRS network operator and
yahoo.com
as your email provider, you will not
be able to send email using
smtp.o2.co.uk
, you would need to use
smtp.mail.yahoo.com.
<
mail_server_port
>
It is an Integer value used to identify the port number on the remote computer
system in
How the configuration could be set/requested:
Set configuration
$PFAL,Cnf.Set,TCP.SMTP.CONNECT=1,217.119.194.35,2222
Get configuration
$PFAL,Cnf.Get,TCP.SMTP.CONNECT
Notes
•
All values are separated by comma
“,”
.
•
Contact your ISP provider to specify a correct outgoing mail server address
and port number.
3.2.23.10 TCP.SMTP.LOGIN
Parameter syntax
TCP.SMTP.LOGIN
This parameter allows you to identity the authentication for the SMTP session when
sending E-Mail to an Internet mail server. Set the Username and Password values
before performing the
TCP.SMTP.Send
command. If the Username or Password is
invalid, or blank and the Username and Password are required, the authentication
to the remote mail server fails.
<”domain”>
String type. It specifies the domain name from the Internet address. For example
“fal.de”.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 196 of 271
