C
ONFIGURATION
C
OMMAND
S
ET
- F
IRMWARE
R
EVISION
2.4.0_
BETA
-
V
ERSION
1.0.0
3.2.4.1.1 GPS.Nav.Position<buffer_index> – Gets the travelled distance from a stored position ........... 84
3.2.4.1.2 GPS.Nav.Position<buffer_index>=<type> – Stores temporarily a GPS position ...................... 84
3.2.4.1.3 GPS.Nav.Position<buffer_index>=save<storage_index> – Moves GPS position data from buffer
3.2.4.1.4 GPS.Nav.Position<buffer_index>=load<storage_index> – Loads GPS data from storage to
3.2.4.1.5 GPS.Nav.Distance – Gets the current travelled distance from a start point ..............................86
3.2.4.1.6 GPS.Nav.Distance=<value> – Sets/resets the distance to a user value ...................................87
3.2.4.1.7 GPS.Nav.SaveLastValid – Saves the last valid position, if no GPS-fix valid ........................... 87
3.2.4.1.8 GPS.Nav.PowerSave=<on>,<onTime>,<lpTime> – Enables/Disables the low power mode ....88
3.2.4.2.1 GPS.History.Write,<flag>,<”text”> – Stores GPS data or user text in the history memory ...... 89
3.2.4.2.2 GPS.History.Clear– Clears the history memory ....................................................................... 90
3.2.4.2.3 GPS.History.GetStart– Shows the oldest date stored in the history memory .......................... 91
3.2.4.2.4 GPS.History.SetRead,<s_date>,<s_time>-,<e_date>,<e_time>– Selects the number of records
3.2.4.2.5.1 How to read the history records in textual format ................................................................ 93
3.2.4.2.5.2 Further notes for converting history data with special remark to data/event logging features
3.2.4.3.1 GPS.Geofence.Park.Set –Activates a park area .......................................................................98
3.2.4.3.2 GPS.Geofence.Park.Remove– Disables the activated park area ............................................. 98
3.2.4.3.3 GPS.Geofence.GeoState,<geo_id> – Gets the state of a Geofence ...................................... 100
3.2.4.3.4 GPS.Geofence.AreaState,<area_id>– Gets the state of an Area ........................................... 100
3.2.5.1.1 GSM.PIN=<”pin”> - Enters the PIN number of the used SIM card ..........................................101
3.2.5.1.2 GSM.PUK=<”puk”>,<”pin”> - Enters the PUK and PIN numbers of the used SIM card ..........101
3.2.5.1.3 GSM.IMEI – Gets the serial identification number of the device ............................................. 101
3.2.5.1.4 GSM.SIMID – Get the ID of SIM Card ..................................................................................... 102
3.2.5.1.5 GSM.OwnNumber– Gets the current voice call number of the device .................................... 102
3.2.5.1.6 GSM.Balance– Gets the account information of the used prepaid SIM card .......................... 102
3.2.5.2.1 GSM.VoiceCall.Dial,<“p_number“> - Makes a GSM voice call .............................................. 103
3.2.5.2.2 GSM.VoiceCall.Accept - Accepts an incoming voice call ....................................................... 103
3.2.5.2.3 GSM.VoiceCall.Hangup – Hangs up an active voice call ....................................................... 103
3.2.5.2.4 GSM.VoiceCall.Audio.Profile=<audio_index> – Sets the active audio profile .........................104
3.2.5.2.5 GSM.VoiceCall.Ringtone=<type>,<volume> - Sets the ring tone settings .............................. 104
3.2.5.2.6 GSM.VoiceCall.Volume.Speaker=<n_gain>,<volume>,<sidetone> - Sets or gets the
3.2.5.2.7 GSM.VoiceCall.Volume.Microphone=<gain>,<n_gain> - Sets or gets the microphone settings
3.2.5.3.1 GSM.SMS.Send,<”p_number“>,<protocols>,<”text”> - Sends an SMS message .................. 106
3.2.5.3.2 GSM.SMS.Inbox.State – Shows inbox SMS ........................................................................... 107
3.2.5.3.3 GSM.SMS.Inbox.Clear – Clears inbox SMS ........................................................................... 107
3.2.5.3.4 GSM.SMS.Outbox.State – Shows outbox SMS ..................................................................... 107
3.2.5.3.5 GSM.SMS.Outbox.Clear – Clears outbox SMS ..................................................................... 107
3.2.5.4.1 GSM.DataCall.Send,<protocols>,<”text”> - Transfers messages via an established data call 108
3.2.5.4.2 GSM.DataCall.Accept - Accepts an incoming Data call ......................................................... 108
3.2.5.4.3 GSM.DataCall.Hangup – Hangs up an active voice call ....................................................... 109
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 4 of 271
