C
ONFIGURATION
C
OMMAND
S
ET
- F
IRMWARE
R
EVISION
2.4.0_
BETA
-
V
ERSION
1.0.0
3.2.1.15 “DISPLAY” command type
3.2.1.15.1 Display.Show – Displays a specific view on the MAMBOII's screen
Command syntax
$PFAL,Display.Show=<
Examples
$PFAL,Display.Show=VIEW_GSM
$PFAL,Display.Show=VIEW_GPS
……
……
Responses
E.g $SUCCESS
Command description
This command displays a specific view on the MAMBOII's screen.
Parameter description
<view>
Determines the view to be displayed on the screen. Following views are
supported:
Value
Meaning
VIEW_GSM
Displays the GSM view (
graphically displays the GSM
operator name and field strength - A line made up of a series of
dashes)
VIEW_GPS
Displays the GPS view (graphically displays the current
Location, Speed and Direction)
VIEW_SKY
Displays the SKY view (graphically displays the number and
position of the satellites on the horizon in the form of a polar
plot)
VIEW_SAT
Displays the SAT view (
graphically and textually displays the
satellite number, status, azimuth, elevation, C/No, and last five
seconds of measured signal strength)
VIEW_MENU
Displays the first Menu view (displays the main menu
created with
DISP.MENU<id>
)
VIEW_PBOOK
Displays the PBook view (displays all phonebook entries
created with
DISP.PHONE<index>
)
VIEW_TACHO
Displays the Tacho view (g
raphically and textually displays
the current speed in km/h)
VIEW_KOMPASS
Displays the Compass view (graphically displays the
current direction you are going)
VIEW_HEADING
Displays the Heading view (g
raphically displays the current
direction you are going and current speed you are moving)
VIEW_MILOMETER
Displays the Milemeter view (g
raphically displays in
miles the current distance travelled from a start point)
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 65 of 271