C
ONFIGURATION
C
OMMAND
S
ET
- F
IRMWARE
R
EVISION
2.4.0_
BETA
-
V
ERSION
1.0.0
PFAL COMMAND SET
MEANING
Chapter
$PFAL,GPS.History.Clear
Clears the history memory space
$PFAL,GPS.History.GetStart
Retrieves the oldest date stored in the history
memory
$PFAL,GPS.History.SetRead,<
s_date
>,<
s_time
>-
<
e_date
>,<
e_time
>
Selects the number of records from the history
memory to be downloaded
$PFAL,GPS.History.Read
Downloads the selected records from the history
memory
$PFAL,GPS.History.Push
Downloads the selected history records at once
$PFAL,GPS.Geofence.Park.Set
Places/activates a virtual circular fence
around
vehicle (Park area)
$PFAL,GPS.Geofence.Park.Remove
Disables an activated park area
$PFAL,GPS.Geofence.GeoState,<
geo_id
>
Retrieves the state of a defined geo-fence
$PFAL,GPS.Geofence.AreaState,<
area_id
>
Retrieves the state of a defined area
GSM commands
$PFAL,GSM.PIN=<”
pin
”>
Enters the PIN number of the used SIM card
$PFAL,GSM.PUK=<”
puk
”>,<”
pin
”>
Enters the PUK and PIN numbers
$PFAL,GSM.IMEI
Retrieves the serial identification number of the
product
$PFAL,GSM.SIMID
Retrieves the ID of SIM Card
$PFAL,GSM.OwnNumber
Retrieves the caller's phone number
$PFAL,GSM.Balance
Retrieves the account information of the used SIM
card
$PFAL,GSM.VoiceCall.Dial,< “
p_number
“>
Performs a GSM Voice call
$PFAL,GSM.VoiceCall.Accept
Accepts an incoming voice call
$PFAL,GSM.VoiceCall.Hangup
Hangs-up an active voice call
$PFAL,GSM.VoiceCall.Audio.Profile=<
audio_index>
Sets the active audio profile
$PFAL,GSM.VoiceCall.Ringtone=<
type
>,<
volume
>
Sets or retrieves the ring tone settings
$PFAL,GSM.VoiceCall.Volume.Speaker=<
n_gain
>,<
volume
>,<
sidetone
>
Sets or retrieves the loudspeaker settings
$PFAL,GSM.VoiceCall.Volume.Microphone=<
gain
>,<
n_gai
n
>
Sets or retrieves the microphone settings
$PFAL,GSM.SMS.Send,<”
p_number
“>,<
protocols
>,<”
text
”> Sends a SMS to the defined phone number
$PFAL,GSM.SMS.Inbox.State
Retrieves all inbox SMS messages
$PFAL,GSM.SMS.Inbox.Clear
Clears all inbox SMS messages (SMS memory for
incoming messages)
$PFAL,GSM.SMS.Outbox.State
Retrieves all outbox SMS messages
$PFAL,GSM.SMS.Outbox.Clear
Clears all outbox SMS messages (SMS memory for
outgoing messages)
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 28 of 271