C
ONFIGURATION
C
OMMAND
S
ET
- F
IRMWARE
R
EVISION
2.4.0_
BETA
-
V
ERSION
1.0.0
3.2.1.9
“GPS” command index
3.2.1.9.1
Sys.GPS.Enable – Powers on the GPS engine
Command syntax
Sys.GPS.Enable
Examples
$PFAL,Sys.GPS.Enable
Responses
E.g.
$SUCCESS
Command description
This command powers on the GPS engine if previously has been switched off. The
event
SYS.GPS.eEnable
occurs. By default the GPS engine is always powered on
when the system starts.
Parameter description
None.
3.2.1.9.2
Sys.GPS.Disable – Powers down the GPS engine
Command syntax
Sys.GPS.Disable
Examples
$PFAL,Sys.GPS.Disable
Responses
E.g.
$SUCCESS
Command description
This command powers off the GPS engine if it is currently running. The event
SYS.GPS.eDisable
occurs.
Parameter description
None.
3.2.1.9.3
Sys.GPS.Reset – Resets the GPS engine
Command syntax
Sys.GPS.Reset
Examples
$PFAL,Sys.GPS.Reset
Responses
E.g.
$SUCCESS
Command description
This command resets the GPS engine. The event
SYS.GSM.eEnable
occurs when
the GSM engine restarts. This command can be executed, for example, when the
GPS engine reports error during the runtime.
Parameter description
None.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 58 of 271