C
ONFIGURATION
C
OMMAND
S
ET
- F
IRMWARE
R
EVISION
2.4.0_
BETA
-
V
ERSION
1.0.0
PFAL COMMAND SET
MEANING
Chapter
$PFAL,Sys.CPU.Reset
Resets main controller and set system into the
firmware update mode.
$PFAL,Sys.IEEE.Enable
Powers on IEEE module
$PFAL,Sys.IEEE.Disable
Powers off IEEE module
$PFAL,Sys.IEEE.Reset
Resets IEEE module.
DISPLAY commands
$PFAL,Display.Show=<
view
>
Shows a specific view on the screen.
$PFAL,Display.Dialog=<
id
>,<
”caption”
>,<
icon
>,<
tim
eout
>,<
”left-option”
>,<
”right-option”
>,<
”text”
>
Creates and displays a dialog box on the screen.
$PFAL,Display.Alarm=<
image
>,<
timeout
>,<
”text”
>
Displays a specific alarm icon on the screen
CNF Configuration commands
$PFAL,Cnf.Set,<
parameter_name=value
>
Sets up or changes device configuration settings
$PFAL,Cnf.Get,<
parameter_name
>
Retrieves configuration settings of the set
parameter name
$PFAL,Cnf.Clear,<
parameter_name
>
Clears the configuration settings of the set
parameter name
$PFAL,Cnf.ShowUser
Retrieves user settings
$PFAL,Cnf.ShowDefault
Retrieves default settings
$PFAL,Cnf.Show
Retrieves settings of all used parameters
$PFAL,Cnf.Search,<
parameter_name
>
Searches for a parameter name (text type)
IO commands
$PFAL,IO.Beep<
index
>=<
config_type
>
Generates beep tones
$PFAL,IO.Vibration=<
config_type
>
Manages device vibrations
GPS commands
$PFAL,GPS.Nav.Position<
buffer_index
>
Retrieves the distance of the device from a stored
location
$PFAL,GPS.Nav.Position<
buffer_index
>=<
type
>
Saves temporarily a device location
$PFAL,GPS.Nav.Position<
buffer_index
>=save<
storage_in
dex
>
Moves the GPS data from the buffer and stores it to
a storage index
$PFAL,GPS.Nav.Position<
buffer_index
>=load<
storage_ind
ex
>
Loads the GPS data from storage to buffer index for
temporarily use
$PFAL,GPS.Nav.Distance
Retrieves the distance from a start point
$PFAL,GPS.Nav.Distance=<
value
>
Sets/resets the distance to a user defined value
$PFAL,GPS.Nav.SaveLastValid
Saves last valid position.
$PFAL,GPS.Nav.PowerSave=<
on
>,<
onTime
>,<
lpTime
>
Enables/Disables the low power mode of GPS
receiver.
$PFAL,GPS.History.Write,<
add_prot_to_memory
>,<”
text
”>
Records a GPS position data into the history
memory
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 27 of 271