C
ONFIGURATION
C
OMMAND
S
ET
- F
IRMWARE
R
EVISION
2.4.0_
BETA
-
V
ERSION
1.0.0
3.2.2.7
Cnf.Search,<
parameter_search
> – Searches for a parameter
name
Command syntax
$PFAL,Cnf.Search,<
Examples
$PFAL,Cnf.Search,”
DEVICE
”
$PFAL,Cnf.Search,”
TCP
”
………..
Responses
E.g.
$ALIAS.CNF=Config
$ALIAS.SYS.COUNTER0=_RESET
$ALIAS.SYS.TIMER0=_1SEC
$ALIAS.SYS.TIMER2=_7SEC
$ALIAS.SYS.TRIGGER1=TRIGGER_ARM
$ALIAS.SYS.TIMER8=_60SEC
$ALIAS.SYS=System
$AL0=SYS.Device.eStart:SYS.TIMER_1SEC.start=cyclic,1000&SYS.TIMER_60S
EC.start=cyclic,60000&SYS.TIMER_60SEC.start=cyclic,60000&SYS.TIMER_7S
EC.start=cyclic,7000
$AL1=SYS.TIMER.e_20SEC&TCP.Client.sConnected&GPS.Nav.Position.s0>100:
GPS.Nav.Position0=current&TCP.Client.Send,8,""
and so on ....
Command description
This command pools all available parameters and settings that start with the
entered characters
.
Parameter description
<parameter_search>
Determines the text, in capital letters, to be searched. The specified text must be
wrapped in quotation marks (""). The text to be searched can be one of the
parameter names listed in chapter
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 81 of 271
