C
ONFIGURATION
C
OMMAND
S
ET
- F
IRMWARE
R
EVISION
2.4.0_
BETA
-
V
ERSION
1.0.0
3.2.4.1.8
GPS.Nav.PowerSave=<
on
>,<
onTime
>,<
lpTime
> – Enables/Disables the
low power mode
Command syntax
$PFAL,GPS.Nav.Powersave=<
Examples
$PFAL,GPS.Nav.Powersave=on,400,2000
$PFAL,GPS.Nav.Powersave=off
Responses
E.g. $SUCCESS
Command description
This command enables or disables individually the low-power mode of the
integrated high sensitive GPS receiver
. B
y default, it is disabled (
off
).
Parameter description
<on>
String type. Enables or disables low-power mode. It can be set to:
Value
Meaning
on
Enables low-power mode.
off
Disables low-power mode.
<onTime>
Integer type in the range
200
to
900
. It defines the
OnTime
period, in
milliseconds, the GPS receiver will stay in full power state until a GPS position
solution (fix) is made and estimated to be reliable.
<lpTime>
Integer type in the range
1000
...
10000
. It defines the complete interval of time,
in milliseconds, the embedded GPS receiver will stay in full and low power states.
Note:
•
For optimum performance, it is recommended to use either 300 ms
onTime
and 1000 ms
lpTime
or 400 ms
onTime
and 2000 ms
lpTime
.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 88 of 271
