C
ONFIGURATION
C
OMMAND
S
ET
- F
IRMWARE
R
EVISION
2.4.0_
BETA
-
V
ERSION
1.0.0
3.2.5.5.1 GSM.GPRS.Connect – Performs a GPRS attach ................................................................... 109
3.2.5.5.2 GSM.GPRS.Disconnect – Performs a GPRS detach ..............................................................109
3.2.5.5.3 GSM.GPRS.State – Gets the GPRS status ............................................................................ 110
3.2.5.5.4 GSM.GPRS.Traffic=<complete>,<incoming>,<outgoing> – Set or read a GPRS traffic counter
3.2.6.1.1 TCP.Client.Connect - Performs a TCP connection to the server ............................................ 111
3.2.6.1.2 TCP.Client.Send,<protocols>,<”text”> - Transfers a TCP packet to the connected server .....112
3.2.6.1.3 TCP.Client.State – Gets the status of the TCP connection ..................................................... 112
3.2.6.1.4 TCP.Client.Disconnect - Disconnects from TCP server .......................................................... 113
3.2.6.2.1 TCP.Storage.Dispatch - Moves TCP storage contents to outgoing TCP buffer ...................... 114
3.2.6.2.2 TCP.Storage.Clear – Clears TCP Storage .............................................................................. 114
3.2.6.2.3 TCP.Storage.AddProtocol,<protocols>,<”text”> - Addes data to the TCP storage ................. 115
3.2.6.2.4 TCP.Storage.AddRecord,<protocol>,<”text”> - Appends a binary dataframe to the TCP storage
3.2.6.3.1 TCP.SMTP.Send,<email_address>,<protocols>,<”text”> - Send an Email to the connected
3.2.7.1.1 MSG.Send.Serial,<protocols>,<”text”> - Redirects command responses to the serial interface
3.2.7.1.2 MSG.Send.RawSerial,<protocols>,<”text”> - Redirects command responses to the serial
3.2.7.1.3 MSG.Send.CSD,<protocols>,<”text”> - Redirects command responses to CSD channel. ..... 122
3.2.7.1.4 MSG.Send.TCP,<protocols>,<”text”> - Redirects command responses to TCP channel .......123
3.2.7.2.1 MSG.Mode.Serial=<out_sys_messages>,<mode>- Defines the communication mode on serial
3.2.7.2.2 MSG.Mode.CSD=<out_sys_messages>,<mode> - Defines the communication mode on CSD
3.2.7.2.3 MSG.Mode.TCP=<out_sys_messages>,<mode> - Defines the communication mode on TCP
3.2.7.3.1 MSG.Version.Complete - Gets all versions information of the target device .......................... 130
3.2.7.3.2 MSG.Version.Modules - Gets the modules versions of the target device ............................... 130
3.2.7.3.3 MSG.Version.InternalComm - Gets the internal communication version of the target device 130
3.2.7.3.4 MSG.Version.HardwareRev - Gets the hardware revision of the target device ...................... 131
3.2.7.3.5 MSG.Version.Hardware - Gets the hardware version of the target device ............................. 131
3.2.7.3.6 MSG.Version.Software - Gets the software version of the target device ................................ 131
3.2.7.3.7 MSG.Version.SoftwareID - Gets the firmware ID of the firmware ........................................... 131
3.2.7.4.1 MSG.Info.ServerLogin – Gets login information that the device sends to the server ..............132
3.2.7.4.2 MSG.Info.Protocol,<protocols>,<”text”> - Transmits protocol reports to the sender ............... 132
3.2.7.4.3 MSG.Info.Time – Gets the current system time ...................................................................... 133
3.2.7.4.4 MSG.Info.Alarm,<alarm_index> - Shows the configuration of an alarm ................................. 134
3.2.8.1.1 IEEE.Keyfob<kf_div_index>.LED<lindex>=<config_type> – Configures LEDs on a Keyfob
3.2.8.1.2 IEEE.Keyfob<kf_div_index>.Beep=<config_type> – Generates beep tones on a Keyfob device
3.2.8.1.3 IEEE.Keyfob<kf_div_index>.Vibration=<config_type> – Generates vibration on a Keyfob device
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 5 of 271
