C
ONFIGURATION
C
OMMAND
S
ET
- F
IRMWARE
R
EVISION
2.4.0_
BETA
-
V
ERSION
1.0.0
3.2.1.10 “UserEvent” command index
3.2.1.10.1 Sys.UserEvent<
index
> – Creates a user-event for specific application
requirements
Command syntax
Examples
$PFAL,Sys.UserEvent
0
Responses
E.g.
$launch user event 0
Command description
This command is intended to create a user-event (see chapter
which
can be used to execute one or more alarms. Once this command is executed the
corresponding event index
(e.g SYS.UserEvent.e0)
rises.
Parameter description
<index>
Determines the index of the UserEvent to be created. Up to 10 UserEvents are
available. It can be set to a value from
0
to
9
.
Notes
•
This event can be used to directly combine/link several alarms. (i.e. for
optimizing larger configurations or simply if more than 5 conditions are
needed).
WARNING
•
The
UserEvent
is not recommended
for use, as it may produce
„endless loops“
that can slow down the system performances or may affect the stability of
other functions.
•
Use the
UserEvents
at
own risk.
However, when using the
UserEvents,
think
about all consequences of (maybe recursively) launching alarms, especially
in combination with various states, which may influence itself by actions.
System behaviour can be very unpredictable and complex.
•
Therefore
no support
will be provided for configurations that contain
UserEvents
.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 59 of 271
