UMN:CLI
User Manual
V5824G
112
6.3.8
System Memory Information
To display a system memory status, use the following command.
Command
Mode
Description
show memory
Enable
Global
Bridge
Shows system memory information.
show memory
{
bgp
|
dhcp
|
gpon
|
gpon-olt
|
imi
|
lib
|
nsm
|
ospf
|
pim
|
rip
|
swch
}
Shows system memory information with a specific
option.
6.3.9
CPU Packet Management
6.3.9.1
CPU Packet Limit
If the CPU of the system processes too many packets during the operation, it may cause
the performance decrease. To prevent the CPU overload, you can manually limit the
number of the packets handled by CPU.
To limit the number of the packets handled by CPU, use the following command.
Command
Mode
Description
cpu packet limit
<500-20000>
Global
Limits the number of RX packets of CPU.
500-20000: packets per second (default: 1500)
cpu packet limit
<0-7> <500-
20000>
Limits the number of RX packets per second based on
queue number.
0-7: queue number
500-20000: packets per second (default: 1500)
To display a configured CPU packet limit, use the following command.
Command
Mode
Description
show cpu packet limit
Enable
Global
Shows a configured CPU packet limit.
6.3.10
Running Process
The V5824G provides a function that shows information of the running processes. The
information with this command can be very useful to manage the switch.
To display information of the running processes, use the following command.
Command
Mode
Description
show
process
Enable
Global
Bridge
Shows information of the running processes.
