User Manual
UMN:CLI
V5824G
469
Specifying OLT and ONU ID
When specifying an OLT ID in the CLI, you can simply put the number in the form of
PORT number
such as
1
,
2
,
3
,
4
… 7, 8
. Multiple input is also possible, e.g.
1, 2, 3
or
3-4
.
When specifying an ONU ID, just remember that the ONU ID is always between 1 and
128 or ONU serial number. Multiple input for the ONU ID is the same as the ONU ID, e.g.
1-3
,
8-22, DSNWcb00282d
.
CLI Structure
To configure GPON functionalities, enter the
gpon
command in
Global Configuration
mode. The
GPON Configuration
mode is a stage of preparation for the detail PON
configuration. In this mode, you can open
ONU/PM/Traffic/VoIP/DBA Profile Configuration
mode or
GPON-OLT Configuration
mode.
shows the CLI structure of
GPON Configuration
mode.
Privilege EXEC View Mode
Privilege EXEC Enable Mode
Global Configuration Mode
GPON
Configuration Mode
‘
configure terminal
’
‘
gpon
’
GPON-OLT
‘
gpon-olt
OLT-ID
’
ONU-Profile
‘
onu-profile
test
create
’
DBA-Profile
‘
dba-profile
test
create
’
Traffic-Profile
‘
traffic-profile
test
create
’
PM-Profile
‘
pm-profile
test
create
’
Multicast-Profile
‘
multicast-profile
test
create
’
Mapper
Bridge
ANI
UNI
TDM-PW-Profile
‘
tdm-pw-profile
test
create
’
PW-Maintenance-Profile
‘
pw-maintenance-profile
test
create
’
IP-host
VoIP
TDM
CES
TDM
UNI
IP-path
Extended-VLAN Tagging Profile
‘
extended-vlan-tagging-operation
test
create
’
SIP
MGCP
H248
GEM Port
Network CTP
Video return
path service
T-CONT
Rate-Limit Profile
‘
rate-limit-profile
test
create
’
Multicast ACL Profile
‘
multicast-access-list
test
create
’
VoIP-Profile
‘
voip-profile
test
create
’
Fig. 11.2
CLI Structure of
GPON Configuration
Mode
