UMN:CLI
User Manual
V5824G
490
11.2.1.3
Manual ONU (ONT) Registration Mode
To register/delete ONU (ONT) manually, use the following command.
Command
Mode
Description
onu add
ONU-ID
SERIAL_NUM
{
auto-learning
|
PASSWD
[
enable
|
disable
]}
GPON-OLT
Registers ONU (ONT) with specified ONU-ID, serial
number and password.
Enables/disables the password auto-learning mode of
the ONU (ONT)
ONU-ID:ONU ID (1 to 128) or ONU serial number
SERIAL_NUM: ONU
’s serial number
PASSWD: ONU password
no onu
ONU-ID
Deletes the registered ONU with ONU ID.
11.2.1.4
ONU Registration Mode
The default ONU registration mode is the auto mode in which an OLT registers ONUs
automatically, when recognizing the optical signal from the ONUs. For an optimized ONU
configuration, however, the manual mode is recommended. Some options are only
available in the manual mode.
Upon registering an ONU automatically, the registration mode of the ONU will be changed
to the manual mode. Note that when you use this command, the registration mode of the
ONUs that are already registered in the auto mode will be changed to the manual mode
as well.
To change the ONU registration mode from auto to manual mode, use the following
command.
Command
Mode
Description
olt
auto-to-manual
OLT-ID
enable
GPON
Sets the current ONU registration mode to the manual
mode.
OLT-ID: GPON port number
olt auto-to-manual enable
GPON-OLT
To change the ONU registration mode from manual to auto mode, use the following
command.
Command
Mode
Description
olt auto-to-manual
OLT-ID
disable
GPON
Sets the current ONU registration mode to the auto
mode.
olt auto-to-manual disable
GPON-OLT
To display the ONU registration mode, use the following command.
Command
Mode
Description
show olt auto-to-manual
[
OLT-ID
]
GPON
Shows the current ONU registration mode.
show olt auto-to-manual
GPON-OLT
