User Manual
UMN:CLI
V5824G
489
Serial Number-based ONU Registration
For ONU (ONT) registration, OLT requests a serial number of the connected ONUs
(ONTs) periodically. OLT registers a specific ONU which replies to OLT with its serial
number. The V5824G can allocate ONU-ID to an ONU which sends a valid serial number
to OLT. When ONU with the specific serial number is activated, it is assigned the
allocated ONU-ID.
To register/delete ONU (ONT) automatically by ONU
’s serial number acquisition, use the
following command.
Command
Mode
Description
discover-serial-number start
<1-
1200>
GPON-OLT
Starts to register ONT by its serial number and
specifies an interval for ONU
’s serial number
acquisition.
1-1200: serial number acquisition interval
discover-serial-number stop
Stops discovering ONT using its serial number.
show
discover-serial-number
interval
Shows the configured interval for requesting ONU
’s
serial number.
To remove the serial number of ONU, use the following command.
Command
Mode
Description
onu remove serial-number
ONU-
ID
GPON-OLT
Removes the ONU serial number.
ONU-ID: ONU ID (1-128) or ONU serial number
Registration ID-based ONU Registration
A registration ID is assigned to a subscriber at the management level, and provisioned
both into the OLT and communicated to installation or repair personnel or even to the
subscriber directly. The registration ID populates the ONU
’s PLOAM password, which is
used by the OLT to recognize the ONU. The OLT may learn the value of the ONU
’s serial
number for possible subsequent use in serial number based authentication.
To enter the registration ID into the ONU in the field, use the following command.
Command
Mode
Description
onu add
ONU-ID
registration-id
ID
GPON-OLT
Adds ONU (ONT) with a specified resgistration ID.
ID: registration ID (PLOAM password)
