User Manual
UMN:CLI
V5824G
253
8.3.5.7
Displaying Configuration
To display the configurations of STP, use the following command.
Command
Mode
Description
show spanning-tree
Enable
Global
Bridge
Shows all configurations of STP
show spanning-tree active
[
detail
]
Bridge
Shows STP information on active
interface:
detail: detailed STP information (as
option).
show spanning-tree blockedport
Shows information of the blocked ports
show spanning-tree detail
[
active
]
Shows detailed information of STP.
show spanning-tree pathcost method
Shows
the
path-cost
calculation
method.
show spanning-tree inconsistentports
Shows information of root-inconsistency
state.
show spanning-tree bridge
[
address
|
detail
|
forward-time
|
hello-time
|
id
|
max-age
|
protocol
|
priority
[
system-id
] ]
Shows information of the bridge status
and configuration
show spanning-tree root
[
address
|
cost
|
detail
|
forward-time
|
hello-time
|
id
|
max-age
|
port
|
priority
[
system-id
] ]
Shows the status and configuration for
the root bridge.
show spanning-tree port
PORTS
[
active
[
detail
] |
cost
|
detail
[
active
] |
edgeport
|
inconsistency
|
rootcost
|
state
|
priority
]
Shows STP information of specified
port.
show spanning-tree summary
[
totals
]
Shows a summary of STP:
totals: the total lines of STP
8.3.6
Configuring MSTP
To configure MSTP, use the following steps.
Step 1
Enable STP function using the
spanning-tree
command.
Step 2
Select a MSTP mode using the
spanning-tree mode
mst
command.
Step 3
Configure detail options if specific commands are required.
Step 4
Enable a MSTP daemon using the
spanning-tree mst
command.
