UMN:CLI
User Manual
V5824G
530
To delete the threshold of module operation depending on specified monitoring type, use
the following command.
Command
Mode
Description
no
{
ani-rx-power
|
ani-voltage
|
ani-tx-bias
|
ani-tx-power
|
ani-
temperature
}
threshold
[{
low
|
high
}]
ONU-Profile
Deletes the configured threshold.
11.3.2.9
Applying Traffic & PM Profile
To add/delete the user-defined Traffic profile to a specified ONU profile, use the following
command.
Command
Mode
Description
traffic-profile
NAME
ONU-Profile
Adds the existing Traffic profile to ONU profile.
NAME: Traffic profile name
no traffic-profile
NAME
Removes the Traffic profile from ONU profile.
For the details of how to create and configure the traffic profile, see
To add/delete the user-defined PM profile to a specified ONU profile, use the following
command.
Command
Mode
Description
pm-profile
NAME
ONU-Profile
Adds the existing PM profile to ONU profile.
NAME: Traffic profile name
no pm-profile
Removes the PM profile from ONU profile.
For the details of how to create and configure the PM profile, see
11.3.3
Overwriting Traffic Profile Configuration
Basically, one traffic profile can be applied to the ONU profile. So, if a number of cases for
traffic profile configuration are required on the ONU profile, the user should create the
corresponding traffic profiles and apply them to the ONU profile.
The overwriting traffic profile configuration can help reducing the count of creating and
applying the traffic profile. This configuration overwrites the corresponding setting of the
applied traffic profile.
i
